http://www.bkelectricservices.com/

FREE ESTIMATES CALL US NOW 310-430-2300

Pocket sized reference guide. Color code 120/208 on one side 277/480 on the other. Great for wire pulling set-up. For more info contact me at danaelectric@live.com for more details. $ 2.25 included shipping.

KS Electrical was started in 2007 by a family owned, licensed electrical contractor.  Ken Smith, owner and operator, has been in the electrical industry for over 10 years. During the past 10 years he worked on a multitude of jobs ranging from small, residential remodelling jobs to large, commercial new construction. Ken is passionate about helping consumers, while maintaining a very reasonable price point. His customers continually rave about how honest, trustworthy, and punctual he has proven to be. He has an A+ rating from the Better Business Bureau and raving reviews on Kudzu.com and Angies List. Call now for your FREE estimate!

Keating Electric & Technologies provides surge protection solutions for your home and family. We provide home office, home theater and whole house surge protections.

We recenlty purchased of a Lot, and enclosed was 12 GE Transformers Single Phase. We are extremely motivated to sell them! Please feel free to contact me if you have any questions, and hope to hear from you soon, All The Best, Gary 323-891-5723  

Please see attached PDF with product information and specs. Thank you

Are you a rock star Electrician who knows electrical components of manufacturing equipment inside out?  We’re looking for someone who is awesome at troubleshooting, loves a challenge, enjoys change and variety, and can produce positive end results.

Performs all tasks as Industrial Electrician including: design and prepare new or modified installations per current electrical code including modification or drawing new prints or schematics as needed.  Supports line management requests for electrical servicing.

Desired Skills and Experience
Trade school degree required.  Electrician license or journeyman certificate.  5+ years experience to include trouble shooting skills, communication skills and familiarity with major components of a typical electrical control box with regard to industrial, electrical construction for commercial/industrial buildings.  Must be familiar with electrical service equipment at 4160 volts.

Merle Norman Cosmetics located in Los Angeles CA,  develops, manufactures and distributes its own full line of skin care and color cosmetics products.  Our products are sold through approximately 1400 independently owned and operated Merle Norman Studios in the United States and Canada.

Merle Norman Cosmetics is committed to the values of individual dignity and personal growth.  We place success in the hands of each employee and welcome energetic people with a positive can-do attitude.  We offer excellent compensation, retirement benefits such as Pension and 401k plans and benefit package. 

We are proud to be a “Made in America” organization.  To learn more about us, please visit our website at: www.merlenorman.com

CONTACT:

If you or someone you know has the skills and experience please send an updated resume and salary history to mncresume5@merlenorman.com.  No walk-ins please.  This position is based at our Sylmar location in the San Fernando Valley.

ONLINE AUCTION. Ends 3.1.17 . To view full details, please go to www.govdeals.com and enter 297-1723 in the QAL (Quick Asset Lookup) search box located on the homepage. AUCTION INCLUDES ALL SQUARE D EQUIPMENT INSIDE BUILDING INCLUDING SQUARE D MOTOR CONTROL CENTER (MCC) MODEL 6 IS 600 AMP RATED AS DESCRIBED BELOW & SHOWN IN PHOTOS:

The main disconnect outside has no cover so most likely not in good condition. • inside fused disconnect is at least a 3 phase 480 volt but probably 600 volt rated (currently has 225 amp fuses installed) • the Sq D transformer is 25KVA rated, cat# 25S3HFCU • the Sq D panel is a NQOD30L225CU with a few breakers installed • Looks like possibly a Sq D lighting contactor above door • the Sq D MCC (Motor Control Center) is 600 amp rated, with 5 sections. Some buckets are labeled spare but the rest used to be active, please see the picture of #2 seepage bucket (opened), it has associated parts still installed. Other buckets are labeled, see below: - Seepage Pump P-1 Control Panel - 120 V Control for RVSS P-1 - Transformer - Surge Suppressor - Seepage Pump No.1 - Remote Control Panel - 120 V Control for RVSS P-2 - Seepage Pump No.2 - Metering - MCB (main circuit breaker)

BUYER MUST REMOVE/DISCONNECT ALL SQUARE D EQUIPMENT INSIDE BUILDING. PROVIDE EQUIPMENT TO LOAD SUCH AS HOIST, GANTRY CRANE, FORKLIFT, ETC. UNPAVED ACCESS ROAD. PICK UP ONLY MONDAY THRU THURSDAY BETWEEN 8:00AM & 4:00PM.

LIABILITY RELEASE MUST BE SIGNED AND PROOF OF INSURANCE IS REQUIRED: $300,000 GENERAL LIABILITY, $300,000 AUTO AND WORKERS COMP. MUST NAME THE S FL WATER MANAGEMENT DISTRICT AS ADDITIONAL INSURED. SEE G350A Equipment Removal Requirements Draft.docx ATTACHMENT FOR FURTHER DETAILS.

LOCATED REMOTE SITE G350A IN HENDRY COUNTY (DOWN A SHORT WAY FROM G508 WHICH IS ADDRESS LISTED WITH THIS POSTING). SEE PHOTO OF ACTUAL BUILDING ITEMS LOCATED IN. NO FACILITIES. BEWARE OF POTENTIAL WASPS.

PROPERTY MAY BE INSPECTED ON WEDNESDAY, FEBRUARY 1ST AT 9:00 AM. BY SCHEDULED APPOINTMENT ONLY! Please contact: Karen Kempf, Phone: (561) 682-2113 or e-mail: kkempf@sfwmd.gov

CONDITION: EQUIPMENT HAS NOT BEEN TESTED AND MOST ITEMS FOR SALE ARE USED AND MAY CONTAIN DEFECTS NOT IMMEDIATELY DETECTABLE. ALL EQUIPMENT ARE SOLD IN "AS-IS" CONDITION. WE STRONGLY RECOMMEND YOU INSPECT EQUIPMENT BEFORE BIDDING!

Product Features
1.  5.7inch LCD screen display.
2.  Full functions, satisfy all kinds of CT(protection CT, measuring CT, TP) test requirements, such as excitation characteristic test, turn ratio, polarity, secondary winding resistance, secondary burden, ratio error, angular difference and etc. Also it can be used to test excitation characteristic, turn ratio, polarity, secondary winding resistance,ratio error, angular difference and etc all kinds of PT.
3.  More efficient to test CT, no need to use standard CT, primary current injection device, load case, voltage   regulation control and high current lead to verify the CT.
4.  Meets IEC60044-1, IEC60044-6 standards of all kinds of CT/PT.
5.  Accurately measure ratio error and angular error. Max. Ratio error ±0.05% is permitted. Max. Angular error ±2min if permitted. It can measure 0.2S class CT and turns ratio range is 1-35000.
6.  Auto test CT/PT parameters on knee point voltage/current, 5% and 10% deviation curve measurement,  Accuracy limit factor (ALF), safety factor (FS), second time constants (Ts), residual magnetism factor(Kr),  saturated and unsaturated inductance.
7.  Using variable frequency method to test VA curves and 10% error curve of CT/TP. Max. Output is 180V and 5A rms(15A peak value), but it can make CT test when keen point is up to 60kV.
8.  Easy to use. To test CT DC resistance, excitation and polarity only by one button. All CT tests adopt same     one connect method except load test.
9.  Storage 1000 groups data, data can be saved even power down. Equipped with micro printer to print test result after testing completed.
10. Test results can be download by USB disk.
11.  Small size, weight is no more than 10kg, suitable for on-site use.

Our client, a commercial electrical, sign & lighting expert, is seeking a Licensed Journeyman or Master Electrician to add to their team. Since 1986, they have continued to grow and hire only the best employees to provide unparalleled service to their customers. In this role, you would be responsible for servicing, troubleshooting, and performing new installations in a commercial environment.

Qualified candidates must be a licensed electrician (Journeyman or Master). The selected candidate must be able to pass a drug screen, background check, and have a clean driving record.

This is a direct hire position and you would be offered the following excellent benefits: Company truck, gas card, cell phone, health insurance, retirement plan, paid days off.