I am retro fitting all our lighting fixtures to L.E.D. I am selling all T-12 ballasts and 4 foot fluorescent tubes that have been removed. Older ballasts for $2 each, newer ballasts for $3 each and lights (tubes) for .50 each. I also have a few  T-8 tubes

Need Help Estimating?  We provide electrical estimates in all 50 states.

Need more time to project manage and run your business?

Estimating department overwhelmed and backlogged?

Estimator on vacation?

Let Estimating Solutions help.  

Call: 888-874-8099 or email:info@estimatingsolutions.net   Website: http://estimatingsolutions.net

ONLINE AUCTION. Ends 3.1.17 . To view full details, please go to www.govdeals.com and enter 297-1723 in the QAL (Quick Asset Lookup) search box located on the homepage. AUCTION INCLUDES ALL SQUARE D EQUIPMENT INSIDE BUILDING INCLUDING SQUARE D MOTOR CONTROL CENTER (MCC) MODEL 6 IS 600 AMP RATED AS DESCRIBED BELOW & SHOWN IN PHOTOS:

The main disconnect outside has no cover so most likely not in good condition. • inside fused disconnect is at least a 3 phase 480 volt but probably 600 volt rated (currently has 225 amp fuses installed) • the Sq D transformer is 25KVA rated, cat# 25S3HFCU • the Sq D panel is a NQOD30L225CU with a few breakers installed • Looks like possibly a Sq D lighting contactor above door • the Sq D MCC (Motor Control Center) is 600 amp rated, with 5 sections. Some buckets are labeled spare but the rest used to be active, please see the picture of #2 seepage bucket (opened), it has associated parts still installed. Other buckets are labeled, see below: - Seepage Pump P-1 Control Panel - 120 V Control for RVSS P-1 - Transformer - Surge Suppressor - Seepage Pump No.1 - Remote Control Panel - 120 V Control for RVSS P-2 - Seepage Pump No.2 - Metering - MCB (main circuit breaker)

BUYER MUST REMOVE/DISCONNECT ALL SQUARE D EQUIPMENT INSIDE BUILDING. PROVIDE EQUIPMENT TO LOAD SUCH AS HOIST, GANTRY CRANE, FORKLIFT, ETC. UNPAVED ACCESS ROAD. PICK UP ONLY MONDAY THRU THURSDAY BETWEEN 8:00AM & 4:00PM.

LIABILITY RELEASE MUST BE SIGNED AND PROOF OF INSURANCE IS REQUIRED: $300,000 GENERAL LIABILITY, $300,000 AUTO AND WORKERS COMP. MUST NAME THE S FL WATER MANAGEMENT DISTRICT AS ADDITIONAL INSURED. SEE G350A Equipment Removal Requirements Draft.docx ATTACHMENT FOR FURTHER DETAILS.

LOCATED REMOTE SITE G350A IN HENDRY COUNTY (DOWN A SHORT WAY FROM G508 WHICH IS ADDRESS LISTED WITH THIS POSTING). SEE PHOTO OF ACTUAL BUILDING ITEMS LOCATED IN. NO FACILITIES. BEWARE OF POTENTIAL WASPS.

PROPERTY MAY BE INSPECTED ON WEDNESDAY, FEBRUARY 1ST AT 9:00 AM. BY SCHEDULED APPOINTMENT ONLY! Please contact: Karen Kempf, Phone: (561) 682-2113 or e-mail: kkempf@sfwmd.gov

CONDITION: EQUIPMENT HAS NOT BEEN TESTED AND MOST ITEMS FOR SALE ARE USED AND MAY CONTAIN DEFECTS NOT IMMEDIATELY DETECTABLE. ALL EQUIPMENT ARE SOLD IN "AS-IS" CONDITION. WE STRONGLY RECOMMEND YOU INSPECT EQUIPMENT BEFORE BIDDING!

We provide upfront pricing and free quotes! $60/hour 

Thanks, 
Josh

Product Features
1.  5.7inch LCD screen display.
2.  Full functions, satisfy all kinds of CT(protection CT, measuring CT, TP) test requirements, such as excitation characteristic test, turn ratio, polarity, secondary winding resistance, secondary burden, ratio error, angular difference and etc. Also it can be used to test excitation characteristic, turn ratio, polarity, secondary winding resistance,ratio error, angular difference and etc all kinds of PT.
3.  More efficient to test CT, no need to use standard CT, primary current injection device, load case, voltage   regulation control and high current lead to verify the CT.
4.  Meets IEC60044-1, IEC60044-6 standards of all kinds of CT/PT.
5.  Accurately measure ratio error and angular error. Max. Ratio error ±0.05% is permitted. Max. Angular error ±2min if permitted. It can measure 0.2S class CT and turns ratio range is 1-35000.
6.  Auto test CT/PT parameters on knee point voltage/current, 5% and 10% deviation curve measurement,  Accuracy limit factor (ALF), safety factor (FS), second time constants (Ts), residual magnetism factor(Kr),  saturated and unsaturated inductance.
7.  Using variable frequency method to test VA curves and 10% error curve of CT/TP. Max. Output is 180V and 5A rms(15A peak value), but it can make CT test when keen point is up to 60kV.
8.  Easy to use. To test CT DC resistance, excitation and polarity only by one button. All CT tests adopt same     one connect method except load test.
9.  Storage 1000 groups data, data can be saved even power down. Equipped with micro printer to print test result after testing completed.
10. Test results can be download by USB disk.
11.  Small size, weight is no more than 10kg, suitable for on-site use.

    Keating Electric and Technologies wants to be your partner in keeping your house safe, secure and with all the power you need, just the way your home should be.
Keating Electric & Technologies services are mini spotlights to light your house numbers, smaller lights to illuminate keyholes, lighting for your pool, patio and deck & Residential Electrical Contractors.

CALL US FOR ALL YOUR APPLIANCE PROBLEMS.........
We been servicing on most Major Appliances for over 15 years. We service all appliances in a prompt, professional manner.
We guarantee to get the job done right and will work hard to make sure you are 100% completely satisfied. We want to give you the confidence of knowing all your repair needs are in professional hands.
We service from many brands of appliances such as  GE, Maytag, Kenmore, Whirlpool, Frigidaire, Haier and many others.
Whether you have problem with your:
* Washer Machine * Dryer Machine * Dishwasher Machine * Stoves/Oven * Freezers * Ice Makers *  Refrigerators *
One Way Appliance Repair Experts

818-298-8165

Licensed | Insured

24 years experience,license, all of you electrical services i do it all, residential, commercial etc........954-655-5335 .

do small or Big Job

Small company in Norco Looking to hire a certified journeyman electrician.  

Please email resumes to nkcroxton@charter.net.

New Branch Circuit

Home Rewiring

Panel Upgrade

Trouble Shooting

Smoke Detectors

Landscape Lighting

Recessed Lighting

Motor Installation

Wall Mount Plasma T.V Installation

120/240 Volts

277/480 Volts

I am an electrical contractor in Michigan. We do service on cell phone towers in the midwest and areas around the midwest. I am currently looking for an electrical contractor that would be willing to do service calls in the Minnesota area. We pay well. If you are interested please email me at alanogard@msn.com.

uSave LED offers commeercial LED lighting installation and supplies including Walalight line of adjustable LED lights that they manufacture.

For more information please visit http://www.usaveled.com/

We offer an amazing company culture, very unique to the industry! Upbeat, positive and fun...and the potential to make more money than anywhere else. We are looking for the best electricians, with great customer skills. If you are the best electrician you know and are tired of the slackers making the same dollars per hour as you, we are the place for you!

Randy has been doing electrical work since 1978 and has been doing business in the Metro area since 2000. Randy's Electric has built its reputation by giving excellent customer service and completing the job in a timely manner.

Job Description

Installs, maintains and repairs home electrical. We want people who are outgoing and friendly with outstanding customer service skills.

Job Responsibilities:

• Troubleshooting, repairing and servicing assigned jobs.
• Provides technical assistance to clients and performs/oversees field installations and repairs.
• Document all services performed and actions carried on service.

• Responsible for completing small and/or job estimates, develop customers and maintain accounts. 

• Establish and maintain excellent working relationships with customers.

Job Requirements:

• Proficient in most areas electrical service and all Randy's Electric processes. 
• Journeyman’s license and 1+ years of additional electrical service experience.
• A recognized expert in multiple areas of electrical service. 
• Very self-sufficient, and requires minimal supervision. 
• Must be able to complete conceptual estimates as well as hard estimate.  
• Ability to read blueprints and a strong technical aptitude
  Understands and efficiently uses basic computer hardware and software.

Benefits

• Vehicle Provided
• Family based company
• Bonus Pay
• Customer Sentric / Close Company Culture
• Paid vacations

• Cell phone
• 401K after a year
• Dental

24"X36" Cooper Crouse Hinds Electrical Junction Box Cat NO: EJB362408 3 Available.  These items are old stock but have never been installed.  I am willing to meet 4 hours from Wapello Iowa to deliver. $1800/unit OBO I have more pictures available

Electrical Estimating Solutions is specialist in giving the best estimating solutions. Well acquainted to provide wide range of services from electrical cost estimating, estimating software support to hiring labour for electrical project works.