Register Please register or log in.
may be you forgot your password?

Schneider Electric Timer ...

 

 

Schneider Electric RE7MY13MW Timer

TIMER 300V 5AMP RE7 +OPTIONS
New Surplus item removed from new equipment not used. Product data sheet imcluded, no box. Shipping anywere in North America $8.00

 Pay with PayPal and your full purchase price is covered

 artur_p@hotmail.com

 

Features and Specifications
Number of Functions 8
Repeatability Constant Voltage and Temperature 0.20000000000000001
Functions Available External control of the start - External control for partial stop - On-delay - Off-delay - Interval, start on opening of external control contact - Repeat cycle, with off period start - Repeat cycle, with on period start - Interval
Reset Time 50
Output Type Electromechanical
Contact Configuration DPDT
Timing Range 0.05 s to 300 h
Minimum Switching Requirement 12 V per 10
Time Scales 0.05 to 1sec; 0.15 to 3sec; 0.5 to 10sec; 1.5 to 30sec; 5 to 100sec; 15 to 300sec; 1 to 300min; 1.5 to 30min; 1.5 to 30hr; 15 to 300hr
Contact Materials AgNi
Current Rating 5
Degree of Protection IP50 (Housing) - IP20 (Terminals)
Input Voltage Range 24 - 240 VAC/VDC
Frequency 50/60 Hz
Maximum Consumption AC 2.0 VA (24 VAC) - 2.5 VA (48 VAC) - 3.2 VA (110 VAC) - 6.0 VA (240 VAC)
Maximum Consumption DC 1.0 W (48 VDC) - 3.2 W (110 VDC) - 2.0 W (240 VDC)
Tightening Torque 4.5 to 9.9 lb-in
Indication (LED) 3
Mounting Style Din Rail
Weight 149.69999999999999
Ambient Air Temperature around the Device - Operation -20 to 60
Approvals GL - CSA - CE - RoHS - UL
Ambient Air Temperature around the Device - Storage -40 to 85
Electrical Life (UL508) Operations at Rated Current (Resistive) 100,000 operations
Mechanical Life Unpowered 20,000,000 operations
Vibration Resistance - Operational A=0.35 mm
Shock Resistance 15 gn - 11 ms

CT Analyzer

Product Features
1.  5.7inch LCD screen display.
2.  Full functions, satisfy all kinds of CT(protection CT, measuring CT, TP) test requirements, such as excitation characteristic test, turn ratio, polarity, secondary winding resistance, secondary burden, ratio error, angular difference and etc. Also it can be used to test excitation characteristic, turn ratio, polarity, secondary winding resistance,ratio error, angular difference and etc all kinds of PT.
3.  More efficient to test CT, no need to use standard CT, primary current injection device, load case, voltage   regulation control and high current lead to verify the CT.
4.  Meets IEC60044-1, IEC60044-6 standards of all kinds of CT/PT.
5.  Accurately measure ratio error and angular error. Max. Ratio error ±0.05% is permitted. Max. Angular error ±2min if permitted. It can measure 0.2S class CT and turns ratio range is 1-35000.
6.  Auto test CT/PT parameters on knee point voltage/current, 5% and 10% deviation curve measurement,  Accuracy limit factor (ALF), safety factor (FS), second time constants (Ts), residual magnetism factor(Kr),  saturated and unsaturated inductance.
7.  Using variable frequency method to test VA curves and 10% error curve of CT/TP. Max. Output is 180V and 5A rms(15A peak value), but it can make CT test when keen point is up to 60kV.
8.  Easy to use. To test CT DC resistance, excitation and polarity only by one button. All CT tests adopt same     one connect method except load test.
9.  Storage 1000 groups data, data can be saved even power down. Equipped with micro printer to print test result after testing completed.
10. Test results can be download by USB disk.
11.  Small size, weight is no more than 10kg, suitable for on-site use.



 

Click >>> Subscribe to Our Store Newsletter <<<
for New Product info & Specials

website contact
Terms of Use