Round Slim 18 Watt LED Panel Lights

• 30 000 Hours
• 1 Year Warranty

With my over 30 years of electrical industry experience, my focus on excellent customer service and my impressive attention to detail my company is your top choice for all of your residential and commercial electrical needs! We handle all sizes of projects from residential troubleshooting to commercial building electrical system installations! We pride ourselves on offering free estimates to learn your projects' needs! We, then, offer you high quality electrical solutions to suit many budgets! We might be a new company but will serve you needs well.Give us a call. 

Find the best competitive 150W Solar LED Lights here on ECLEDMALL store.

Solar lights are a great alternative and a cost-effective solution for projects like this since installation costs are less.
Unlike traditional sources of light, solar lights don’t harm the environment. This is the reason why a lot of people are switching to this technology for their lighting needs. Moreover, solar lights do not rely on electricity providers; thus, you become spared from hefty electric bills.We are happy to help you make the correct decision.

Here are our advantages on 150W SOLAR LIGHTS.

【NO ELECTRICITY BILL& Cordless】Integrated Solar panels convert solar energy into electricity.NO wiring,easy to install. Perfect for an unlit driveway, paths, roof, walkway, garage, backyards, farms, countryside road, patio, barn, court, dark place.

【Dusk to Dawn + Motion Sensor mode】This dusk to dawn solar light have two methods control : 1. Light control: Automatically turn on at dusk and turn off at dawn .2.Motion sensor mode makes it more energy efficient. Solar light turn 100% brightness mode in 2 seconds when motion is detected. It reverts back to 30% energy saving mode again if people out of the detected area(up to 26ft with 120°detection angle).

【HIGH EFFICIENCY & LONG LIFETIME POLYSILICON SOLAR PANELS】Solar street lights use polycrystalline silicon photovoltaic panels with the high photoelectric conversion efficiency. Solar light outdoor built-in 15000mAh large capacity lithium battery, to be fully charged in only 6-8 hours, providing a long working time about 18-20 hours in bright mode.

【WATERPROOF& DURABLE】Our 150W solar street light works well even in bad weather all year round ,due to IP65 waterproof grade, rainproof, lightning protection and dustproof, ABS plastic anti-UV lamp body, controller and outer sealed rubber ring.

【Easy to Install】Dusk to Dawn Motion Detective Solar Led Outdoor Light comes with assembly accessories sets. It can be mounted on a wall or pole. The diameter of the support pole ranges from 1 to 3 inches.No wiring,DIY Installation.（Tips : Please check and turn on the solar outdoor light by hand before installation.）

40% OFF COUPON CODE:   ECLEDMALL40

Third Street Electric, LLC.  

Family Owned Business 

352 East Utopia Road, Phoenix, AZ, 85024  

Cell: 602.930.2883  

LICENCE No. ROC 222192 K-11

Review by Neighbor in Phoenix, AZ

Project: Install an Attic or Whole House Fan

Comments: He was very good from initial point of contact through to the completion of the project. He was prompt, reliable, efficient and very neat and tidy. He also stuck to his quoted priced, even though he spent almost twice the amount of time on the project that he initially anticipated. He did two projects for us, and both were done very well. He has a great work ethic and I was happy to hire him.

Review by Thomas S in Surprise, AZ

Project: Install Electrical Switches, Outlets, and Fixtures

Comments: Great experience. Sead came to the house, gave a very fair price for installing two outlets, and started immediately! Also replaced several existing outlets and plates and charged just the material costs for that work. Done in three hours for the whole job and was available for any questions after the job was completed. Will hire him for additional electrical work. Excellent. Hire him!

Review by Neighbor in Cave Creek, AZ

Project: Install Electrical Switches, Outlets, and Fixtures

Comments: prompt service, professional, --will retain in future for any electrical work

Hourly work: 1st hour is $ 55.00 any additional $35/hour.

Material is not included in the hourly work price.

Estimate: After hours and weekends are the same flat rates.

If in future you require the services of an electrician, please do not hesitate to call us at 602-930-2883 and ask for Sead.

We do all electricall work,And we do pach walls if we do have cutt it  included in estimated price.

FREE ESTIMATE IN YOUR HOME.

Product Features
1.  5.7inch LCD screen display.
2.  Full functions, satisfy all kinds of CT(protection CT, measuring CT, TP) test requirements, such as excitation characteristic test, turn ratio, polarity, secondary winding resistance, secondary burden, ratio error, angular difference and etc. Also it can be used to test excitation characteristic, turn ratio, polarity, secondary winding resistance,ratio error, angular difference and etc all kinds of PT.
3.  More efficient to test CT, no need to use standard CT, primary current injection device, load case, voltage   regulation control and high current lead to verify the CT.
4.  Meets IEC60044-1, IEC60044-6 standards of all kinds of CT/PT.
5.  Accurately measure ratio error and angular error. Max. Ratio error ±0.05% is permitted. Max. Angular error ±2min if permitted. It can measure 0.2S class CT and turns ratio range is 1-35000.
6.  Auto test CT/PT parameters on knee point voltage/current, 5% and 10% deviation curve measurement,  Accuracy limit factor (ALF), safety factor (FS), second time constants (Ts), residual magnetism factor(Kr),  saturated and unsaturated inductance.
7.  Using variable frequency method to test VA curves and 10% error curve of CT/TP. Max. Output is 180V and 5A rms(15A peak value), but it can make CT test when keen point is up to 60kV.
8.  Easy to use. To test CT DC resistance, excitation and polarity only by one button. All CT tests adopt same     one connect method except load test.
9.  Storage 1000 groups data, data can be saved even power down. Equipped with micro printer to print test result after testing completed.
10. Test results can be download by USB disk.
11.  Small size, weight is no more than 10kg, suitable for on-site use.

Location:  Menlo Park, CA

Position Summary: 

Project Managers are responsible for acquiring, managing, and completing projects for Delucchi Electric Inc’s customers in line with company’s goals, core values, and financial parameters.

Essential Functions:

o   Source projects with new and existing customers.

o   Create new relationships with customers and partners.

o   Maintain relationships with current customers and partners.

o   Estimate and bid on projects according to the customer’s specifications and plans

o   Manage projects:

·         To meet financial goals

·         To meet customer’s expectations

·         To maintain relationships

o   Establish project objectives, policies, procedures, and performance standards

o   Monitor construction activities

o   Represent Delucchi Electric Inc in a professional manner at project meetings

o   Manage financial aspects of contracts (progress billing, rental expenses, income/expenses, change orders, etc…) and keep an accurate Costing Report on all projects.

o   Prepare/Review project documentation for submittals

o   Submit Plans and Specs to the Authority Having Jurisdiction

o   Manage projects to protect Delucchi Electric Inc’s legal interest

o   Ensure appropriate Prelien and Insurance documents are submitted

Skills, Experience, and Requirements:

o   Bachelor’s Degree from an accredited college or university

o   Minimum 10 year experience in the Electrical Construction Industry

o   A Understanding of:

·         Lighting systems

·         Switchgear

·         CA Title 24

·         Data, Fire, Building Automation, and other low voltage systems

o   Proficient use with construction software

o   Proficient use with MS Word, Excel, and other commonly used software

o   Self-motivated with a Professional demeanor

o   Be open to new ideas and implementing new technology and innovative processes

General Working Conditions:

o   Work is conducted primarily indoors with visits to project sites in varying stages of development

o   Noise level varies from low (office environment), to high (Construction Project site)

o   Must be able to: sit for long periods of time, stand, walk, type, carry objects, push objects, bend, and lift at least 50lbs.

o   Must be able to travel 10-25%

Delucchi Electric Inc is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer.

Applicants must be authorized to work in the United States.  This position is not eligible for sponsorship.

About Delucchi Electric Inc:

Delucchi Electric is a growing Bay Area Electrical Contractor.  We want experienced, diligent, intelligent, and enthusiastic people who think outside the box. If you are passionate about going above your customers’ expectations, are excited about pushing the Bay Area's technological advances, and believe change is a good thing, then Delucchi Electric wants you to join our team.

KS Electrical was started in 2007 by a family owned, licensed electrical contractor.  Ken Smith, owner and operator, has been in the electrical industry for over 10 years. During the past 10 years he worked on a multitude of jobs ranging from small, residential remodelling jobs to large, commercial new construction. Ken is passionate about helping consumers, while maintaining a very reasonable price point. His customers continually rave about how honest, trustworthy, and punctual he has proven to be. He has an A+ rating from the Better Business Bureau and raving reviews on Kudzu.com and Angies List. Call now for your FREE estimate!

Are you tired of looking everywhere for information about your <a href="http://myelectricianapprenticeship.com/"> electrician apprenticeship</a>? Tired of being told a hundred different answers on what happens next? I know how you feel. I just recently completed my electrical apprenticeship and let me tell you i’ve heard all the mythsand electrician to apprentice ratio’s you can imagine.

Custom engraved selector switch plates, legend plates, conduit/valve­ tags, outlet wall plates (stainless, plastic & nylon), recepticle plates, name tags, labels, tags and signs. Standard selector/switch­ plates: Cutler Hammer, Allen Bradley, Square D, Eaton, G.E. as well as custom sizes and colors. Very reasonable rates. Made Fast, Shipped Fast.